http://producepreciousmetals.com/
some comments on his channel :
http://www.youtube.com/user/ProducePreciousMetal?feature=watch
"About Joe Champion
On January 11th 1985 he was a very succesful con artist,and managed to "steal" quite a bit of money. He was eventually caught and on April 28th 1998 he was convicted of 3rd degree felony theft in maricopa county,and sentenced to 10 years in prison. He eventually was paroled 3 years and 1 month later on May 28th 2001,and served parole until Nov. 03, 2004.
Champion talks about his brutal savage beating ... truth is his mental ill stepson lost it one day. Just GOOGLE the doc"
"The gold color on these pieces of silver is just a tarnish caused by the yeast in his "mirical process".
Put the pieces in a little vinegar and it goes away. Poof gone!
Joe Champion has a dangerous addiction with theatrics, and fabricating things, or stretching the truth.
Google is full f his outlandish claims. Just read his own blogs. He contradicts himself over and over on his own web page"
maandag 9 januari 2012
woensdag 4 mei 2011
drjoechampion303groupmember.com ?
As 3D did reakt there is a drjoechampion303groupmember.com but there is a password needed...
I did ask other 303members about it but no reply..
I did ask other 303members about it but no reply..
woensdag 13 april 2011
Copper to goldmaking licence
A few months later the silver + air seems not to be needed any more... just cheap copper bars....
enjoy this info if you can make it work (i did not)
Here it is:
----- Original Message -----
From: Ted Rey
To: Hans S
Sent: Monday, September 06, 2010 5:44 PM
Subject: Copper Configuration
Hello, we are going to get started on the copper. for this method airflow and AL boat
is not required. You wil need poured copper not pressed. If you purchase pressed
you will need to melt it then repour it. once you repour take your bars and wrap them
tightly in aluminum foil. Wrap with about 30 layers of aluminum foil.
Place the copper in the in the center of the reactor. Set temperature to 291 C, let it resonate for 48 hours.
Then turn the temperature to 303 C let it resonate another 48 hours.
After you 4 days of resonance, remove the copper from the reactor and let It cool.
After cooling we will run thru the next phase which will require electro digestion.
Please test and take pictures of the copper before and after resonance.
Regards,
this is wat you should get according to Joe C :
----- Original Message -----
From: Dr. Champion
To: Dr. Champion
Sent: Friday, December 17, 2010 5:52 PM
Subject: A non expected advancement
This will not be seen on my website and is for the licences holders only
A little background
I took some of the 303 copper and added 90% silver and melted it together. The piece was drilled and sent to the laboratory below. The silver in the piece was put into the mix. What this means is that the Pt and Au came from the copper. Making the percentage of Pt and Au equal to the material from the copper. This means that the entire amount of Au and Pt in the button attached is ~50^ gold and 50% platinum.
I considered it to be Ag and Au due to limited equipment. And it origination from Cu. Below is the original transcripts from the laboratory that did the analysis.
Now I will bet busy on Rare Earths
To fully understand the analzsis below take out the silver for I intestinally added it
Dr. Champion
---------- Forwarded message ----------
From: David S
Date: Thu, Dec 16, 2010 at 5:45 PM
Subject: Fw: Assat results
To: drc@drjoechampion.com, drjoechampion@gmail.com
----- Forwarded Message ----
From: "ray" To: dschutz
Sent: Thu, December 16, 2010 4:21:18 PM
Subject: Assat results
David, the assay results of the sample you sent
in are as follows. Written report will go out in
the mail tonight. Gave you results in percentages
as requisted. Thanks, Ray
Unmarked sample, metel chips,
Au- 3%
Ag- 91% high grade silver
Cu- 1%
Ni- 1.5%
Pt- 3%
Does not total 100%
enjoy this info if you can make it work (i did not)
Here it is:
----- Original Message -----
From: Ted Rey
To: Hans S
Sent: Monday, September 06, 2010 5:44 PM
Subject: Copper Configuration
Hello, we are going to get started on the copper. for this method airflow and AL boat
is not required. You wil need poured copper not pressed. If you purchase pressed
you will need to melt it then repour it. once you repour take your bars and wrap them
tightly in aluminum foil. Wrap with about 30 layers of aluminum foil.
Place the copper in the in the center of the reactor. Set temperature to 291 C, let it resonate for 48 hours.
Then turn the temperature to 303 C let it resonate another 48 hours.
After you 4 days of resonance, remove the copper from the reactor and let It cool.
After cooling we will run thru the next phase which will require electro digestion.
Please test and take pictures of the copper before and after resonance.
Regards,
this is wat you should get according to Joe C :
----- Original Message -----
From: Dr. Champion
To: Dr. Champion
Sent: Friday, December 17, 2010 5:52 PM
Subject: A non expected advancement
This will not be seen on my website and is for the licences holders only
A little background
I took some of the 303 copper and added 90% silver and melted it together. The piece was drilled and sent to the laboratory below. The silver in the piece was put into the mix. What this means is that the Pt and Au came from the copper. Making the percentage of Pt and Au equal to the material from the copper. This means that the entire amount of Au and Pt in the button attached is ~50^ gold and 50% platinum.
I considered it to be Ag and Au due to limited equipment. And it origination from Cu. Below is the original transcripts from the laboratory that did the analysis.
Now I will bet busy on Rare Earths
To fully understand the analzsis below take out the silver for I intestinally added it
Dr. Champion
---------- Forwarded message ----------
From: David S
Date: Thu, Dec 16, 2010 at 5:45 PM
Subject: Fw: Assat results
To: drc@drjoechampion.com, drjoechampion@gmail.com
----- Forwarded Message ----
From: "ray" To: dschutz
Sent: Thu, December 16, 2010 4:21:18 PM
Subject: Assat results
David, the assay results of the sample you sent
in are as follows. Written report will go out in
the mail tonight. Gave you results in percentages
as requisted. Thanks, Ray
Unmarked sample, metel chips,
Au- 3%
Ag- 91% high grade silver
Cu- 1%
Ni- 1.5%
Pt- 3%
Does not total 100%
woensdag 30 maart 2011
My licence effort to make gold
As you can see making gold according to the licence is relatively simple ?!
just the right temp and some air...
----- Original Message -----
From: Hans S
To: Dr. Champion
Sent: Tuesday, June 29, 2010 12:47 PM
Subject: Help needed for getting resonance
Hello Dr.C
Had my first run the last 4 days with this setup:
Air Temp setting 294 to 297C for getting 291C in Alu pipe ('boat').
Hysteresis set to 1C
After 1 day 295C was needed for getting 291 into the Alu. Stable 291C for 3 days(mass helps...).
Square Alu pipe 10cm length 25cm, 4mm thick. With 16mm Alu base plate. Total mass: 1.4Kg
Tubing covered with alu foil after putting the silver bar in.
Air heating spiral made of 12mm tubing, 6 meters.
Used K type sensors (NiCr-Ni , - 50 to +400 °C) small(3mm)&fast :0.3sec.
Klass 2 deviation: 291Cx0.0075 =+/- 2 C
Sensors 2-3cm into the Alu (holes drilled)
Air pump adjustable from 1 to 9 liters a min. 2 used.
Silver 250gr after 100Hours, no gold formation according to gold tester Mizar M24
Small discoloration of the silver, easy to be wiped away (see middle )
So Dr.C no result so far.
Need more precise sensors? No solid Alu(1.4 kg not enough?)for the ‘boat’? ,
Need to use thin household foil(with enough mass)? Less space between silver and Alu?
Hans
Amsterdam
The Netherlands
His answer:
From: Dr. Champion
To: Dr. Champion
Sent: Tuesday, June 29, 2010 4:25 PM
Subject: My analysis of Hans first test and suggestions.
Everything appears to be totally proper except for the silver resonance. It is obvious that the Al temperature and resonance is working within his kiln. This is obvious from the discoloration of his silver. Allow me to explain this phenomenon. The discoloration occurs from two occurrences’. First there is a slight positive resonance in the reactor with a weak coupling of the resonance to the silver. The coloration of the bar is due to this resonance and the positive air flow, Atmospheric air is ~80% nitrogen and this action on VAu will produce the color. Also remember the resonance coming out of the Al tubing.
Simple practically if the resonance is not directly coupled to the silver a damping effect will occur. This is one of the reasons I have used Al foil because it is not rigid. Now you can use Al foil within a rigid Al container but the Al foil appears to couple to rigid silver more effectively. Hans setup is very professional and all that is required now is a stronger resonance in the bar.
Think of it as a tuning fork and you want to resonate the bar as strongly as possible.
Dr. Champion
Later i tried several diffent setups but no succes...
only my power company is happy with the 1000kWh of experimenting...
have still contact with other unsuccesfull licence members who are still hopefull to receive usefull tech info?!
just the right temp and some air...
----- Original Message -----
From: Hans S
To: Dr. Champion
Sent: Tuesday, June 29, 2010 12:47 PM
Subject: Help needed for getting resonance
Hello Dr.C
Had my first run the last 4 days with this setup:
Air Temp setting 294 to 297C for getting 291C in Alu pipe ('boat').
Hysteresis set to 1C
After 1 day 295C was needed for getting 291 into the Alu. Stable 291C for 3 days(mass helps...).
Square Alu pipe 10cm length 25cm, 4mm thick. With 16mm Alu base plate. Total mass: 1.4Kg
Tubing covered with alu foil after putting the silver bar in.
Air heating spiral made of 12mm tubing, 6 meters.
Used K type sensors (NiCr-Ni , - 50 to +400 °C) small(3mm)&fast :0.3sec.
Klass 2 deviation: 291Cx0.0075 =+/- 2 C
Sensors 2-3cm into the Alu (holes drilled)
Air pump adjustable from 1 to 9 liters a min. 2 used.
Silver 250gr after 100Hours, no gold formation according to gold tester Mizar M24
Small discoloration of the silver, easy to be wiped away (see middle )
So Dr.C no result so far.
Need more precise sensors? No solid Alu(1.4 kg not enough?)for the ‘boat’? ,
Need to use thin household foil(with enough mass)? Less space between silver and Alu?
Hans
Amsterdam
The Netherlands
His answer:
From: Dr. Champion
To: Dr. Champion
Sent: Tuesday, June 29, 2010 4:25 PM
Subject: My analysis of Hans first test and suggestions.
Everything appears to be totally proper except for the silver resonance. It is obvious that the Al temperature and resonance is working within his kiln. This is obvious from the discoloration of his silver. Allow me to explain this phenomenon. The discoloration occurs from two occurrences’. First there is a slight positive resonance in the reactor with a weak coupling of the resonance to the silver. The coloration of the bar is due to this resonance and the positive air flow, Atmospheric air is ~80% nitrogen and this action on VAu will produce the color. Also remember the resonance coming out of the Al tubing.
Simple practically if the resonance is not directly coupled to the silver a damping effect will occur. This is one of the reasons I have used Al foil because it is not rigid. Now you can use Al foil within a rigid Al container but the Al foil appears to couple to rigid silver more effectively. Hans setup is very professional and all that is required now is a stronger resonance in the bar.
Think of it as a tuning fork and you want to resonate the bar as strongly as possible.
Dr. Champion
Later i tried several diffent setups but no succes...
only my power company is happy with the 1000kWh of experimenting...
have still contact with other unsuccesfull licence members who are still hopefull to receive usefull tech info?!
Dr. Champion is gone phishing for new capital ?
Gone fishing, back in a couple of weeks.see March 25, 2011
Dr. Champion
dinsdag 29 maart 2011
$6000 goldmaking licence for free!
In may 2010 I was convinced that Dr.C was after all those years did finally find the gold making way. I did greedy buy a licence. Here is wat he send me (inc. his spelling errors)(you are free to use this $6000 info to produce gold..:):
Every thing started of slow do to a major discovery it is time to start everything up now.
Most of you realize of my attack last year and I reported vision issues. You will be receiving emails from Ms. Anndrea Horton from time to time and if you need to contact me please feel free to contact here directly. Now here is some science that will get you started.
Prior to starting it is not a requirement but I would appreciate pictures of your progress especially when you start gold production. You name will never be released but only four country.
You received the Gold formation short version
What you see here is specificallythe resonant temperature for aluminum. The resonance temperature for aluminum is 291 C.
This temperature has been known for years but this is not sufficient by itself.
The most recent advancement is the addition of nitrogen and it is easily attainable from the atmosphere the form of air flow.
This is the big dark secret that you have been waiting for.
I put the bars in the following configuration
The above configuration is a aluminum pan made from easily attainable foil. See the next step
The above is the pan with 3 10 ounce silver bars inside the furnace the aluminum tubing goes through the furnace wall and supplies the atmospheric air.
Flowing is how the air enters the tubing.
An aluminum is placed over the aluminum boat housing the silver.
The temperature is set between 292-303 C
The length of reaction time is between 48 to 60 hours.
This is what the bars look like after 48 hours.
I had a technician drill a 150 miligram sample and the following is the result after 20% HNO3.
What you are observing above in the two pictures is very pure gold.
IMPORTRANT NOTE
Without the constant flow of atmospheric air there there is little to no gold formation. You will form a VAu which stands for virtual gold a termed coined from Clemson University on my research.
The flow of air needs to be ar a rate that will allow for the toal temperature to remain at the 291C. If the temperature is to high you will start to produce titanium.
There will be more pictures in 48 hours with results of actual production.
Dr. Champion
Every thing started of slow do to a major discovery it is time to start everything up now.
Most of you realize of my attack last year and I reported vision issues. You will be receiving emails from Ms. Anndrea Horton from time to time and if you need to contact me please feel free to contact here directly. Now here is some science that will get you started.
Prior to starting it is not a requirement but I would appreciate pictures of your progress especially when you start gold production. You name will never be released but only four country.
You received the Gold formation short version
What you see here is specificallythe resonant temperature for aluminum. The resonance temperature for aluminum is 291 C.
This temperature has been known for years but this is not sufficient by itself.
The most recent advancement is the addition of nitrogen and it is easily attainable from the atmosphere the form of air flow.
This is the big dark secret that you have been waiting for.
I put the bars in the following configuration
The above configuration is a aluminum pan made from easily attainable foil. See the next step
The above is the pan with 3 10 ounce silver bars inside the furnace the aluminum tubing goes through the furnace wall and supplies the atmospheric air.
Flowing is how the air enters the tubing.
An aluminum is placed over the aluminum boat housing the silver.
The temperature is set between 292-303 C
The length of reaction time is between 48 to 60 hours.
This is what the bars look like after 48 hours.
I had a technician drill a 150 miligram sample and the following is the result after 20% HNO3.
What you are observing above in the two pictures is very pure gold.
IMPORTRANT NOTE
Without the constant flow of atmospheric air there there is little to no gold formation. You will form a VAu which stands for virtual gold a termed coined from Clemson University on my research.
The flow of air needs to be ar a rate that will allow for the toal temperature to remain at the 291C. If the temperature is to high you will start to produce titanium.
There will be more pictures in 48 hours with results of actual production.
Dr. Champion
Abonneren op:
Posts (Atom)